Cuted on plasma table over a hundred steel plates of various sizes. In most plates drilled different diameter holes.
Steel Beams IPE 240 cuted into the desired size, cleaned, primed, delivered to the object and unloaded with a manipulator on the third floor.
Steel Beams, L-Profiles, U-profiles and SHS were prepared for delivery. Some items are cleaned and primed. Part of the order will immediately be sent to the customer, remaining positions are intended for work at our workshop.
Produced Steel Construction for one of the schools at Riga.
- Staircase stairs with steps from Steel Beam IPE200 and Steel Sheet 10 and 12mm.
- Staircase joists from IPE 200 with holes D = 22mm.
- Sliding support - 63 pc. The material from which was produced: L-Profile 70 * 70 * 6 and 75 * 75 * 6; Strips 60 * 6, 60 * 8, 80 * 8.
We sent another batch of ferrous steel to our manufactory, order was completed with the following items; Steel sheets 10mm and 5mm thick; Steel Stripes 60x6; L-profile 150x10 and Steel Beams IPE 200.
Delivery of even a small amount of steel occurs on a variety of vehicles, for example, as in this photo, client picks up 500 kg of reinforcement on a timber truck.
Quickly manufactured and delivered small steel structures for the client. Special platform supports made of 10mm and 20mm steel sheets.
Full car with 14mm rebar was delivered to object at Riga. Unloading was made with manipulator. Total weight: 22 tons.
Cut into the right dimensions U-Channels, SHS and Rebars. The entire order was delivered to the client at the facility at the center of Riga.
We delivered the reinforcement and reinforcement mesh to Salaspils. Small volumes of reinforcing mesh we deliver with cargo bus, it makes delivery faster and cheaper.
We delivered a batch of cut and bent rebar to the client. The fittings with 12mm diameter were cuted into four meters, the reinforcement bending consists of six types of various bent parts.
We sent a batch of steel to the production of steel construction. The following items were delivered: Steel Sheets 10mm and 16mm thick, RHS 100x100x4 and L-profile 50x50x5.
Cutted Beams and Rebar: Rebar 6mm, 10mm and 12mm, Beams: HEB 320 and HEA 280. All positions were cutted to the correct size and delivered to the object.
6 mm thick plates, were cutted out on a plasma table in a certain size and drilled holes. Number of plates: 297 pieces.
Reinforcing mesh 6x200x200, 2.35x6m - 50 sheets, RHS 100x100x5 - 48 meters. In necessary time, the reinforcing mesh was made and everything was delivered to the client.
Consolidated cargo for three different objects. SHS, rebar and beams were delivered throughout the day in different parts of Latvia.
We drove to the building place and unloaded with manipulator quite a rare position: The U-Profile UPN 350 - 48m.
Two orders were sent at the same time in one car to different building places. First order: Steel Beam IPE 160, Steel Beam IPE 80; Second order: Steel Beam IPE 120.
Produced steel construction for new CSDD based at Jelgava. Were used a variety of steel positions: Sheets, Beams, U-Profiles, Flats, L profiles, RHS.
Reinforcement batch made of stainless steel with a diameter of 16mm and 20mm.
Prepared columns for a building at Jelgava. Steel colums were made from RHS: 140х140х6, 150х150х6, 100х80х4, 180х180х6. RHS were welded with 12 mm thick steel plates.
RHS from black steel are cuted to a 45 degree angle and prepared for installation on the building pla
Large size steel beams and U profiles, were delivered to the construction site outside of Riga. We delivered the following positions: IPE 360, UPE 360, IPE 330, IPE 500.
U profiles and Steel Beams are sent to our manufactory for the production of a metal construction. The cargo consists of the following items: HEA 140, HEA 160, HEA 180, HEA 200, HEA 240, HEA 260, HEA 280, IPE 180, UPN 180
Large size L profiles are prepared for shipment to the client. The size of the L profiles: 200x200x16, steel grade S355.
We are actively involved in the construction of the Catholic church. These days we make installation of load-bearing roof structures. Our company has gained new experience on this unusual object.
Manufactured supporting structures for the roof. Were used steel beams HEA 280. In the nearest future we will realize mounting. Object: construction of the church in Ikšķile.
The batch of reinforcement and reinforcement bending. We manufactured, loaded and shipped reinforcement to Germany. The order consisted of the following positions: bars of reinforcement length 12 meters, diameter 12mm - 11.5 tons, different complexity reinforcement bending - 10 tons.
The following steel positions were cleaned, primed and painted: RHS 80 * 80 * 4, 80 * 80 * 5, 100 * 100 * 4, 140 * 140 * 5, 140 * 140 * 6, 160 * 160 * 5, 100 * 80 * 4, Steel Beams HEA240, U profile UPN80, steel Sheets 10,16,20. Steel grade for all positions: S355.
U profile 14П goes to the building place. Positions up to 6m in length and weighing up to 1.5 tons are delivered in Riga by minibuses in the shortest possible time.
On the order brought a batch of large diameters CHS and steel beams IPE 140.
We sent a batch of steel to the client. The order included the following items: RHS: 60x60x2, 50x25x2, 20x20x1.5; Steel Flats 30x4, 20x4, 25x4, 60x6, 50x5, 40x5; Steel squares: 20mm, 16mm, 14mm; Shafts 20mm, 16mm; CHS: 200x3, 150x2, 121x2, 193.7x6, 42.4x3.2, 21.3x2.6. At the building place, everything was unloaded using a manipulator.
Rebar with a diameter 32mm and 12mm is sent to the cusomer`s construction site and will be unloaded by the manipulator.
We produce a wide variety of work with steel sheets: cutting into the right size, drilling holes, welding sheets.
Construction of a hangar at Tukums, the first stage. The following materials were used: RHS: 80x80x4, 80x80x5, 140x140x6, 160x160x5, Steel Beams HEA 240. All positions are cleaned, primed and painted with RAL7040.
Steel Beams HEB 200, S355, L-12.1m was sent to the building area. The total weight of the beams is 8 tons, all beams were cuted in half.
We delivered a full truck with reinforcing mesh and rebars to an object located 150 kilometers from Riga. All the rebars were cut to 6 meters. Diameters of the rebars: 6mm, 10mm and 12mm, mesh size: 12x200x200 and 12x150x150.
View from the crane to our warehouse, in the construction season, we do dozens of loadings and unloadings of black steel daily.
In appearance it is a small batch of steel, but in fact it is twenty-five different positions of stainless steel: Round Bars with diameter from 8mm to 55mm and Square Bars D = 25mm. Steel grades: AiSi304 and AiSi316
Prepared an order for our regular customer. Steel Beams HEA 300 were cuted in the following sizes: 1010 mm - 18 pieces. In addition, we delivered standard size beams (12:1): HEA 260 - 54.4 m, HEA 300 - 24.2 m.
Unloading truck with Beams and U profiles. Unloaded the following positions: HEB 500, HEA 360, HEA 320, HEA 300, IPE 300, UPN 300. Tomorrow all these positions will be delivered to different building places across Latvia.
The beams was cutted into the required sizes, numbered and prepared for delivery.
We made a construction for the ventilation shaft. The following materials were used: L profile 75х75х6, L profile 100х100х8 and plates from steel sheet 10мм with apertures for fastening.
Full truck with L profiles and RHS was sent to our clients abroad. The order consisted of the following items: L profile: 50х50х5, RHS 40х20х2, RHS 30х30х2, RHS 20х20х2, RHS 25х25х2
Delivered more than two tons of rebar mesh to Kraslava. Grid: 5х200х200.
More than three tons of bent reinforcement was manufactured and delivered to the client. We accept orders for bent reinforcement of any complexity and quantity.
We are not only selling steel, but we are also producing various steel parts.
On the right is the bar for the fence, made from SHS 40x40x3, it was galvanized, painted with two-component primer and with paint RAL 7016.
On the left are frame elements, made from steel Beam HEA240 it was cuted, brushed and primed.
Order included the following positions: SHS 80х40х3, SHS 200х200х10, SHS 160х160х8, Beams HEB 200 and L Profile 80х80х8.
We used plasma to cut 10mm thick steel sheets into several hundred plates. Then we prepared SHS 40x40x3, previously galvanized and drilled the necessary holes. We also manufactured steel parts with holes from a 6mm thick steel sheet.
Steel Beams HEB 200 L=12100 S355 and HEB 240 L=12100 S355 after shopprimer are waiting for transportation to our loyal client.
We produce a variety of works at our workshop. Steel sheet 6mm thick was poured for the dock formwork, an IPE 270 beam was prepared for installation on object. Steel sheet 10mm thick was welded and were made the necessary holes.
Sent batch of metal abroad. The order was completed with the following items: Sheet 2x1000x2000 S235, Strip 25x4 S235, Stripe 40x4 S235, Corner 50x50x4, Corner 50x50x5, Profile pipe 40x20x2 S235, Profile pipe 40x20x1.5 S235
Prepared 34 columns for the object: "Draudzes nama jaunbūve" Mācītāja māja, Līvbērzes pagasts, Jelgavas novads. The metal structures were cleaned with a Sa_2.5 shot blasting machine and primed with 60mk.
Loaded in a truck metal for the customer. The following work was carried out: Shot blasting of metal structures Sa_2.5 and primer 60μ. The following metal positions were used: Pipe 80x80x5 S355 L = 12000, Beam HEA 160 S355 L = 12100, Pipe 120x120x5 S355 L = 12000, Beam HEA 200 S355 L = 12100, Beam HEA 220 S355 L = 12100.
Prepared HQ-beams from sheet metal, thickness 5mm, 10mm un 12mm. Steel grade: S355.
The holes were drilled in each beam, from 30 mm to 60 mm in diameter.
Object: Multi-storey, multi-apartment complex, new building. Street Bultu 2, Rīga
A batch of black metal was delivered to one of the objects in Riga. Order included the following items: Square 20mm - 6 tons, Strip 20x10 - 1.5 tons, Strip 40x10 - 0.5 tons, Profile pipe 40x40x3 - 1.5 tons.
Name of an object: „Draudzes nama jaunbūve” Mācītāja māja, Līvbērzes pagastā, Jelgavas novadā
For production used:
Square pipes (columns) 150х150х6 L = 3940 (12 pieces).
Fixing parts from 16mm thick sheet with M16 studs
For columns were used. plates 25 mm and 12 mm thick
We prepared an order for the customer with the following items: straight fittings of different lengths and diameters, reinforcement mesh, finished metal structures (cuted, primed and painted boxes, made from channel bars welded with metal strips)
Manufactured and assembled metal construction on our object at Jurmala, Muižas street 19.
Works at our black metal area goes full swing. Workers are loading 24 tons of reinforcement in the wagon.
Made delivery of profile pipes, square tubes and strips. The order included the following items: Sloksne 40x8, Sloksne 80x8, Caurule Ta. 40x25x3, Caurule Ta. 40x15x2,
We created and installed the metal frames, which will serve as the store extension. All the beams and pipes were previously prepared in our workshop - cutted, cleaned, primed and painted. Construction, assembly is carried out by "IDL Group" specialists.
Manufacturing and assembly of various designs of metal stairs. We will prepare the best quote of any type and complexity of metal structures and ensuring production within certain time limits.
In our workshop in shirt terms was manufactured a metal shed, after which the team of experts carried out an installation at the object. Basic metals used to construction manufacture: square tubes, rectangular tubes and beams.
Delivered to our customer beam HEB 360 steel grade S275. These beams are used for massive structures with increased endurance.
Presenting your attention the metal framework assembly for the construction of a new store near Riga. The metal was cleaned by shot-blasting machine and coated with a thin layer of soil, and then welding and re-ground treatment were conducted. The final stage in the workshop was the painting. At the appointed time the metal was successfully delivered to the object to the customer for installation, which was made by IDL Group specialists.
A large batch of beams and channels went to the workshop for the metal construction manufacturing, very soon they will be transformed into a primed, painted and soldered metal construction.
After Christmas holidays at our workshop continues active work, preparing channel bars and beams for multiple objects. All positions are cuted to the desired size, stripped, primed and painted. Used metals: channels UPN 240, UPN 220, 260 and beams IPE 270, IPE 240, IPE 220.
Warmly welcome and wish to inform: Our company will go to a little rest from 23/12/2016 to 02/01/2017. Let's start the New Year with your requests.
Another metal construction sent to the customer. On the object all the components of the construction will be assembled into a single unit. Installation will be made by our professional team.
Object: "Viesu mājas jaunbūve. "Pūpoli", Gailīšu pagasts, Bauskas novads. "
Produced work: manufacture and installation of metal framework, which will serve as a transition between the buildings with access to the rooms on the second floor.
The total weight of the structure - 10 tons.
Materials used: Beam HEA200, Channel UPN200, Beam IPE200, Beam IPE160; Shaped tubes: 160x160x4, 200x80x4, 120x60x4.
Specially brought and delivered to the customer beam HEA 280. The length of the beam is 9 meters. Steel grade: S275. We offer all types of beams with non-standard lengths.
At this moment at our workshop carried out works with a large batch of U-profiles UPN 220, UPN 240, UPN260. All rods are primed, cuted into desired sizes and inside are made the necessary holes. Our prfessionals team ready to take up the works of any complexity.
In our manufactory proceeds works with small and large metal constructions. All employees are hardly working to finish on time.
Order is sent to the one of our clients. Square and rectangular pipes of different sizes are sent on a long journey outside Riga.
We drove to the client especially massive beam HEM. In this case we cut to the desired dimensions HEM 100 steel beam.
Sent to the client stainless steel sheets. Sheets AiSi304: 8x1500x3000 and 20x1500x3000. By order we bring any items made of stainless steel at competitive prices and in any quantity.
Metal trade is in full swing, and another batch of beams is sent to the customer. We offer all sorts of black metal and colored metal positions at competitive prices and with excellent quality.
We prepared to send the huge order with a bent rebar. In our workshop we can bend rebar any diameter and are ready to take up the bending of any complexity. All orders are carried out in the shortest time.
We send to one of the our objects order which is composed from stainless steel. This order includes the following items: rods, with diameters ranging from 5 mm to 60 mm, and sheet with thickness 8mm and 20mm. Steel grades are AISI 304 and AISI 316. On request we bring any stainless steel positions, Metals.lv offers low prices and high quality.
Sent to our object not standard length beams. Beams IPE200, 15 meters long. Beams are used for the manufacture of metal construction.
Sliced, cleaned, primed and painted a large batch of beams. What you see in the photo is only a small part of a large order for ф large building object near Riga. In our workshop works high-level professionals who are ready to take the high complexity job.
This week we delivered a small, but very diverse order, of black metall. To our client were sold such positions : corners, round tubes, shaped tubes, squares and stripes.
Company IDL Group participated in the renovation of a famous building in Riga. We have designed and installed a new elevator shaft. IDL Group develops any complexity metal constructions and establishes them on whole Latvian territory.
This week was cut to the desired size, welded and painted special metal constructions. All works were carried out efficiently and in the allotted time. From now hey will be used on one of the major objects at Riga.
Completed our regular customer order . We cut metal sheets with a thickness of 1 mm to 10 mm in desired size. In total we got, more than two thousand platelets. At our metal construction manufacture we cut any metal sheets in the required size
We delivered to ouy manufactory and colored with the desired color large metal corners. Corner dimensions are: 200x100x10 and 100x50x10. We perform all kinds of metal works efficiently and in the shortest time.
The convenience of our customers is very important to us, so from today our site has English version. http://metals.lv/en/
We manufacture and install banisters. During summertime the improvement of courtyards is very actual, therefore banisters are being installed in many courtyards. Our company not only manufactures banisters, stairs, gates, and children's playgrounds, but also offers all the necessary materials.
We begin the rebar delivery to our friends from Finland. First trucks loaded with rebars have been already dispatched, but the remaining ones will leave this week. Very soon our Finnish partners will receive the rebars and use them in construction.
We began the rebar delivery to our friends from Finland. First trucks loaded with rebars have been already dispatched, but the remaining ones will leave this week. Very soon our Finnish partners will receive the rebars and use them in construction.
Cutting to required dimensions and preparing for delivery the shipment of beams. Shipment contains HEA 280 and HEA 300 steel beams. We cut, weld and deliver beams of any size to any location in Latvia. We offer good prices.
We cut with saw the small shipment of beams and sections. All items were delivered on time to the site and unloaded to the necessary height using the manipulator.
We cut with saw the small shipment of beams and sections. All items were delivered on time to the site and unloaded to necessary height using the manipulator.
We cut the beams to dimensions and welded them in the required angle, cleaned, primed and painted. It's very possible that already today they will be installed in one of the sites of Riga.
We cut beams and channels to the required dimensions. When the order is approved, we try to prepare everything in the shortest possible time. Very soon the prepared items will be used for constructing a metal construction.
We sent beams to two objects straight away. Beam IPE 160 will be used in a site in Riga, and the beam HEA 240 will be delivered to a customer outside of Riga.
We signed an important contract with a large company on delivery of shipbuilding steel. Now we also offer a wide assortment of shipbuilding steels in sheets of various thickness and dimensions.
Construction works are continuing actively in Tallinn, the capital of Estonia. Every week our colleagues from Estonia are buying rebars from us for use in their construction sites. This week multiple trucks with rebars were dispatched to Estonia, one of which you can see in the photo.
We sent a small shipment of П-channels to our workshop, to construct a metal construction, which will later be installed in one of the districts of Riga.
We signed contract on metal delivery with Estonian companies and from this moment on the company IDL Group will participate in the construction processes not only in Latvia, but also by our neighbours in Estonia.
We cut to required dimensions and prepared galvanized SHS 80x80x3. Very soon these sections will transform into a quality fence.
Preparation of beams for assembly is actively happening in our workshop. Steel beams HEA 240 were cut to the required dimensions and are going through all the necessary inspections before being assembled on the site
We dispatched a rebar shipment to Estonia. Total weight is 24 tonnes, rebar diameters are D=10mm, D=12mm, D=16mm.
Shipment of metal is dispatched outside the borders of Riga. Round hollow sections, steel beams, sheets, and angle bars were prepared for the shipment.
We carried out full reconstruction of the building in Alberta Street 5, Riga. Very soon the four storey building will be fully renovated and put into operation. We used beams, U-channels, bands, angle bars, pipes, sections, sheets, and other items in our work.
We deliver bands from ferrous metal to the client. Dimensions of the bands are 25х4; 20x4; 30x4. Company IDL Group offers metal bands with various dimensions - all items are in stock in large quantities.
We loaded and delivered to our workshop beams, channels, angles and flat bars for the metal construction manufacturing. HEA 240 beam, channel UPN 160, L-profile 100x100x10, flat bar 70x8 will be used in the work. Depending on various factors our workshop can process up to 50 tons of metal.
We congratulate all our clients in Easter. Let the Easter light positively influence your health, prosperity, individual life, and your company.
Our clients actively purchase from us rebars for concreting at special prices. At the beginning of spring the rebars are becoming more demanded. We offer rebars in all diameters, rebar-mesh, rebar bending, cutting, and delivery for excellent prices.
Company IDL GROUP has opened a new area of operations. We now offer metal forging to our clients. Modern manufacturing allows to produce forged goods much faster than before. Of course, the quality stays the same - as high as possible - and also the artistic spirit of forging is preserved. Send your requests to the e-mail info@metals.lv or call us +371 26611151
We manufactured, delivered and installed new metal stairs in the object. From now on they will securely serve for many years, bringing joy to our clients. If you require any metal constructions, send your requests to our e-mail: info@metals.lv
Company IDL Group actively prepares for the start of the new construction season. Each week new truckloads of metal arrive at our warehouse. We purchase all the necessary items: rebars, sheets, sections, beams, stainless steel, channels, and many other items.
The assortment of the company IDL Group has been supplemented with quality stainless steel and aluminium items. You can view the entire assortment in the category Stainless steel and Aluminium.
Our company creates metal constructions of any difficulty. Experienced specialists will carry out full range of works: cmd, cutting, welding, cleaning, priming, galvanizing, delivery, installation. Each new construction is a challenge for us and it is great honour for us to accomplish it quickly and with excellent quality.
Work is going on with full speed in the workshop, the next shipment of parts has been completed and awaits for the customer. Parts are one of the metal construction types. Our company produces parts of any difficulty for different fields of application.
Current beam shipment has been dispatched in the manufacturing workshop. Soon these beams will be transformed into a metallic construction and will be used in the construction of a new building. Steel beams IPE 240, HEA 100, HEA 240.
Shipment of SHS is handed over to the customer. First they were cut to necessary dimensions and soon these sections will transform into a metallic construction.
Sufficiently larger sections with diameter 200x200x16 were sent to one of the districts of Riga where they will be used in building construction.
We cut, cleaned, primed, painted, and welded U-channels, creating parts with special shape. Channels UPN 400 and UPN 240 were used in the making.
RHS with diameter 33.7х2.9mm were sent today to a client in Ogre city. Total length of sections is 420 metres.
We operatively delivered to client the round hollow sections of the following dimensions: RHS 159x4 L=6000 42m and EHS 88.9x3.6 L=6000 72m. We offer wide assortment of hollow sections - square, rectangular and round shaped.
Our client ordered large HEB 400 steel beam to secure platforms. From now on this steel beam will serve as a reliable reinforcement in the metallic construction and will withstand large loads.
Company IDL Group offers certified metal with good quality. Wide assortment of rebars, L-profiles (angle bars), steel beams, channels, and steel pipes is available in the company warehouse in Riga. Excellent prices and fast delivery to any place in Latvia!
In a short period of time we prepared and quickly ordered for our client special parts with holes and bends, which were manufactured from steel sheets.
We prepared for dispatch a truck with beams and U-channels. The client ordered and we quickly prepared the following items: beams IPE 240, channels 200 UPN, channels 160 UPN.
Our company manufactured metallic firewood boxes. Eighty seven new boxes went on their way to the customer. Metallic angles, steel pipes and rebar-mesh were used to construct the boxes.
Today we have opened a news block in our homepage.
Small shipment of angles and pipes is waiting for the client to pick them up. Diameter of angle 50h50h5, diameter or the pipe 20h20h2. In short period of time these items will be cut to required dimensions and will be prepared for sending.
Today we were visited by our regular client who brought a gift as a gratitude for quick delivery of metal to his object. We are very happy that our client now has his own home. It's a bit sad that this construction has ended, but we hope for cooperation in future.
Today a client turned to us, who needed to have rebars bent. As usual our company was eager to help and in just few hours we cut and bended the rebars to the necessary dimensions. The client was very satisfied with our work, which is very important for our company.
Company IDL Group offers to our clients different souvenirs with our logo: metals.lv, IDL GROUP
Today a contract was signed on long-term cooperation and our partners begin to regularly use a new item in production. Galvanized metal bands DX51 Z100; 0.45 x12 mm; weight of one spool - 95 kg. We can deliver complex items in short time upon request.
Rebar shipment is prepared and awaits the dispatching to the client. First construction phase begins in a large construction object in Ogre city therefore the builders require large amount of rebars.
The priming and painting of beams is complete and soon the metal will be delivered to the customer. Cleaned and primed double T-beams IPE 240.
We cut, cleaned, primed, painted, connected, and delivered them to the client in two days time. Soon they will be installed in the object. Used metals: round steel pipes, diameter 219.1 x 4mm. Steel plates.
Each week new truckloads of various metals arrive to our warehouse. Our company tries to extend the product assortment in our warehouse on a regular basis. Currently we have several thousand different items in our warehouse. Company IDL Group offers high quality metal, excellent prices, and fast delivery.
Another small order was shipped to our regular client. This time square hollow sections with diameter 30x30x2 and one tonne of rebars with D=10mm were required. We carry out all the orders with joy and try to do our work in the highest possible level.
Another small order was shipped to our regular client. This time square hollow sections with diameter 30x30x2 and one tonne of rebars with D=10mm were required. We carry out all the orders with joy and try to do our work in the highest possible level.
One and a half thousand plates of different size were cut from steel sheets. We used sheets of the following thicknesses: 2mm, 3mm, 5mm, 10mm. The client was satisfied and will soon use the plates in his work.
New order is being delivered to the client. Soon these steel beams (HEB 220) and square hollow sections (150x150x10) will be used in the construction of a new house in Riga. We always look forward for new orders and accomplish them on time.
We manufactured and assembled a metal construction in Bauska. In future it will serve as dairy processing plant. We offer to you the manufacturing and on site assembly of various metal constructions.
We prepared the order - double T-beam HEB 160 L=14100 cut in halves. Custom order from our regular client.
Today we prepared and dispatched to our client: 1) Rebars D=12mm B500B - 7t. 2) Pipes 180x180x8 S355 - 3t. 3) Steel beams 12m. Truck with manipulator. IDL Group team is ready for orders of any difficulty.
